- Medium-sized sandbag for balancing heavy gear
- Max payload of 10Kg when filled
- Made of resilient black nylon
- Does not include sand
- Ideal for turning light stands into boom stands
- Zinc plated steel
- provided with T handle
- 5/8'' receiver and 5/8'' stud
- Top attachment 1/8'' (28mm stud)
- M12 screw attachment
- 14cm in height
- Made of zinc steel
- Chrome plated steel
- Aluminium handle
- Provided with a stud and receiver 5/8''
- Weight: 0.8kg (1,7 lbs)
- 28mm socket
- 28mm pin
- Chrome plated steel
- 50cm length (19,6 in)
- Durable chrome steel TVMP adapter with 16 mm/ 5/8'' socket
- Threaded Top Bolt allows for quick connection to lighting yokes
- Addition of a set screw for added security and safety
- Easily remove T-Knob when needed to convert to a Junior Stud
- Works with Junior receivers, baby studs and baby spigots
|Content||Get more from you stands and securely increase their payloads with this high quality sandbag. High-quality, portable, and versatile, it’s a smart addition to you kit that is designed to withstand frequent use and carry heavy loads.
Able to handle an impressive payload of up to 10kg, this sandbag is a must-have accessory for professionals looking to counterbalance their heavier photography equipment. Turn your light stand into a boom stand, or use it with a variety of other stands and rest assured that you gear is safely stabilised. Simply fill the bag with sand, rocks, or anything you can get you hands on and attach the loaded bag to you stand to instantly increase its payload. Protect yourself and your equipment by avoiding any sudden falls with this nifty add-on. Of medium size, this sandbag is made from durable black nylon that can withstand repeated use without struggle.
Extremely portable and convenient, this sandbag weighs a mere 280g when empty, so you won't even notice it in you kit bag. Carry it around empty and fill it up once on location to save on space and weight. Designed in Italy with the highest standards of quality, it is a dependable choice that you're sure to get a lot of use out of. Add this must-have accessory to you kitbag and get more from you equipment. Sand not included.
- Weight: 0.28 kg
- Length: 30 cm
- Height: 45 cm
- Top Attachment: 0
- Colour: Black
- Material: Synthetic Fabric
- Depth: 5 cm
|This swivelling adapter is provided with a handle and adds articulation to the stand or boom. It has on one side a 5/8'' male pin and on the other side a female 5/8'' receiver. Removing the tightening knob allows to drop it into a 1 1/8'' receiver.
- Weight: 0.7 kg
- Length: 19.5 cm
- Weight: 0.3 kg
- Length: 14 cm
|Questo adattatore girevole realizzato in acciaio è fornito con due ricevitori gemelli da 5/8 ''e può aggiungere versatilità a qualsiasi lampada non orientabile. Lo snodo sferico ha un manico in lega di alluminio pull-and-lock con molle anti-rotazione. Pesa 0,8 kg.
|This chrome plated steel arm allows you to place a light over an obstruction. It has a length of 50cm (19,6 in) and features a 28mm socket and pin.
- Weight: 1.5 kg
- Arm Length: 50 cm
- Closed Length: 50 cm
|The Avenger E390 TVMP ADAPTER (YOKE to STAND) is ideal for most TV lighting, LED lights or any lights that have a hole in the yoke for the mounting of a C-Clamp or similar. If these lights need to be mounted on to a baby stand or junior stand, this adapter can do both. The adapter has a 5/8 in female receiver while the outside diameter of the adapter is 28mm/ 1 1/8 in. The TVMP adapter is equipped with a threaded bolt on top that allows for quick attaching to a yoke. A set screw is located below the T-knob and can be used for increased securing and safety. USE with lights with YOKE Mounts: Gemini's, Panel Lights, Astras, LED's, Fresnel lights and Fluorescent Lights. Recommended Accessories: A2030D, D600, D570, C825, C827, A0040CS, A0035B, A5017, A5012, A4050CS, B6026CS, G200-1.
- Weight: 0.15 kg
- Attachment (Bottom): 1 1/8″ (28mm) stud, 5/8″ (16mm) socket
- Top Attachment: 1/2″ screw
- Colour: Silver
- Superclamp Compatible: No
- Material: Steel
- Height: 7.6 cm